RA7/CLKIN as analog input

hello

in an existing environment i want replace a 16C58 with an 16F628A. originally at the CLKIN (RA7) there was an potentiometer. how can i read in analog this pin and must configure them?

thanks for an idea and greetings

Use POT or RCTIME statement. Must add an external capacitor prior to make it work. Input must be set to analog too. CMCON=7.

thanks for the information, unfortunalety it doesn't run...
can you tell my link where CNCOM is described online?can't find a good information

POT and RCTIME are described in the PBP Compiler Manual, but im not sure if my code is arranged right
could you tell me a short example in PBP?

thank you very much

this one comes from Melabs code example

Code:

---

' PicBasic Pro program to read pot and display on LCD

' Define LCD pins
Define  LCD_DREG        PORTA
Define  LCD_DBIT        0
Define  LCD_RSREG      PORTA
Define  LCD_RSBIT      4
Define  LCD_EREG        PORTB
Define  LCD_EBIT        3

' Allocate variables
x      var    byte


        CMCON = 7              ' Set PORTA to digital

        Pause 100              ' Wait for LCD to start


mainloop: Pot PORTB.0, 127, x

        Lcdout $fe, 1, "pot=", #x      ' Send value to LCD

        Pause  100            ' Do it about 10 times a second

        Goto    mainloop        ' Do it forever

        End

---

in the PBP you have also one code example for POT and the according schematic. BTW if you don't have any book on hand, they provide one online

pdf:
http://www.melabs.com/downloads/pbpm304.pdf

Html:
http://microengineeringlabs.com/resources/pbpmanual


CMCON is the register for analog comparator of the PIC16F628. You'll find it in the datasheet section 9.0
datasheet:
http://ww1.microchip.com/downloads/e...Doc/40300c.pdf