Pic12f675

Can someone please give me a indication what i am do-ing wrong i am trying to get serial coms running on a PIC12 but keeps on getting garbage the idea is to build a small data logger one input, rs232 coms and a spi ram chip

Code:

---

DEFINE OSC          4

DEFINE ADC_BITS    10  '10 BIT A/D CONVERSION RESULT
DEFINE ADC_CLOCK    3  'INTERNAL A/D RC CLOCK
DEFINE ADC_SAMPLEUS 50  'SET SAMPLE TIME IN MICROSECONDS
adval0  VAR WORD                'Create adval0 to store result
DATAH VAR BYTE
DATAL VAR BYTE

CMCON = 7              'TURN COMPARITORS OFF
TRISIO = %000001        'Set GSIO 0 INPUTS, others to OUTPUT
ANSEL = %00110001            'Set GSIO 0 TO ANALOG A/D IN W/Frc
ADCON0.7 = 1                'Right Justify for 10-bit

DEFINE DEBUG_REG GPIO          'Set Debug pin port
DEFINE DEBUG_BIT 2            'Set Debug pin bit
DEFINE DEBUG_BAUD 4800        'Set Debug baud rate
DEFINE DEBUG_MODE 1            'Set Debug mode: 0=true,1=inverted

DEFINE DEBUGIN_REG GPIO          'Set Debugin pin por
DEFINE DEBUGIN_BIT 1            'Set Debugin pin bit
DEFINE DEBUGIN_BAUD 4800        'Set Debugin baud rate
DEFINE DEBUGIN_MODE 1            'Set Debugin mode: 0=true,1=inverted

START:
        TOGGLE GPIO.4
    PAUSE 1000
    DEBUG "D"
   
GoTo START

End

---

This will probably help.

Code:

---

DEFINE OSCCAL_1K 1

---

But running RS232 from a 12F675's internal oscillator may not be a good idea.
Those old 4mhz internals aren't very accurate. Especially when the temperature changes.

The 12F683's have the newer precision 8Mhz internals.
Much better for serial.
<br>