Hello is some one have this problems and fix it help me..
my pic work but when i on plug a hall sensor and my pic freezing ..
:rolleyes:
Printable View
Hello is some one have this problems and fix it help me..
my pic work but when i on plug a hall sensor and my pic freezing ..
:rolleyes:
jetpr, I use 18F2620's for just about all of my projects and products at work. I have never had such a problem.. Code please?
Dave Purola,
N8NTA
RPM=0
RPMSamp=0
RPMSamp1=0
RPMSamp2=0
'** RPM **
'60 ms Sample time yields direct RPM readout in 1000's
'Comments start with real RPM of 143,578 and RPMNumSamps=3
Count tachPin, 60 * RPMNumSamps, RPMSamp 'RPMSamp = 430
RPMSamp = RPMSamp * 10 'RPMSamp = 4300
' pause 20
' Count tachPin, 60 * RPMNumSamps, RPMSamp2 'RPMSamp = 430
' RPMSamp2 = RPMSamp2 * 10 'RPMSamp = 4300
' RPMSamp=(RPMSamp1+RPMSamp2)/2
RPM = RPMSamp / (RPMNumSamps * 10) 'RPM = 143
IF NOT RPMNoDecimal Then 'Calculate the tenths if RPMNoDecimal = 0
RPML = RPMSamp // (RPMNumSamps * 10) 'RPML = 10
RPML = RPML / RPMNumSamps 'RPML = 3
EndIF
Is that the whole code?
Well, I guess not ;) But poor PCB layout, schematic, PSU filtering could indeed produce few unwanted issue, that's for sure.
Latch-up caused by a high voltage spike on MCLR (entering programming mode) could be one source. The whole schematic, board layout and whole code would definitely help