Error[126] & Warning[220]
Ladies & Gents,
I spent the weekend figuring out a workable code for using a DS1302 as a countdown timer. Unfortunately, everytime I attempt to compile I get the following:
Code:
Error[126] C:\PBP\PBPPIC14.LIB 556 : Argument out of range (1032 not between 0 and 1023)
Warning[220] C:\PBP\PBPPIC14.LIB 766 : Address exceeds maximum range for this processor.
Warning[220] C:\PBP\PBPPIC14.LIB 767 : Address exceeds maximum range for this processor.
Warning[220] C:\CODE\COUNTDOWN TIMER CODE 011809.MAC 83 : Address exceeds maximum range for this processor.
Warning[220] C:\CODE\COUNTDOWN TIMER CODE 011809.MAC 84 : Address exceeds maximum range for this processor.
Warning[220] C:\PBP\PBPPIC14.LIB 781 : Address exceeds maximum range for this processor.
Warning[220] C:\CODE\COUNTDOWN TIMER CODE 011809.MAC 37 : Address exceeds maximum range for this processor.
Warning[220] C:\PBP\PBPPIC14.LIB 733 : Address exceeds maximum range for this processor.
And so on.
I'm using a PIC16F676 and I've modified the config bits slightly by modifying the .INC file directly:
Code:
;****************************************************************
;* 16F676.INC *
;* *
;* By : Leonard Zerman, Jeff Schmoyer *
;* Notice : Copyright (c) 2003 microEngineering Labs, Inc. *
;* All Rights Reserved *
;* Date : 11/06/03 *
;* Version : 2.45 *
;* Notes : *
;****************************************************************
NOLIST
ifdef PM_USED
LIST
include 'M16F676.INC' ; PM header
device pic16F676, intrc_osc, wdt_on, mclr_on, protect_off
XALL
NOLIST
else
LIST
LIST p = 16F676, r = dec, w = -302
INCLUDE "P16F676.INC" ; MPASM Header
__config _CPD_OFF & _CP_OFF & _BODEN_OFF & _MCLRE_ON & _PWRTE_ON & _WDT_OFF & _INTRC_OSC_NOCLKOUT
NOLIST
endif
LIST
If I comment out certain portions of the code, it compiles fine. I thought at first that I might have just coded something wrong, but there are identical commands not commented out that seem to work fine. I don't know if I've run out of space, but I suspect I have a setting wrong somewhere.
I've done my best to search the forum for these errors, but I'm thrown for a bit of a loop as every case seems to have a different solution and the solutions I've seen don't appear clear cut. From what I've read it might be the MPASM version, a hidden setting somewhere in PBP or MPLAB, or gremlins. Any advice is greatly appreciated.
