Analog input on 18f252

Hi,
I need to set port RA3 (pin 5 on 18f252) in analog mode to read a level of battery.
Now I have ADCON1 = 7 (all input in digital mode)
What Value I need for ADCON0 and ADCON1 to get RA3 in analog mode only?
Thanks

Roberto

There's no way to set ONLY AN3 as analog input on a 252.

The closest you can get is ADCON1 = %10000100 which sets AN0, AN1 and AN3 to analog mode.

If you can move that input to AN0, then you can set ONLY AN0 to analog mode with ADCON1 = %10001110.
<br>

Thankyou so much Darrel,
I must change the wires on my pcb to set AN0 in analog input
bye

Quote:

---

Originally Posted by Darrel Taylor

There's no way to set ONLY AN3 as analog input on a 252.

The closest you can get is ADCON1 = %10000100 which sets AN0, AN1 and AN3 to analog mode.

If you can move that input to AN0, then you can set ONLY AN0 to analog mode with ADCON1 = %10001110.
<br>

---