1 minute 30 seconds

Hello,
They can tell me how can I make a delay of 1 minute 30 seconds using this code. I have tried in various ways without any result.

Thank you

[HTML]CLEAR
LED VAR GPIO.0
CMCON = 7
ANSEL = 0

Include "Elapsed.bas"

Gosub ResetTime ' Reset Time to 0d-00:00:00.00
Gosub StartTimer ' Start the Elapsed Timer

HIGH LED ; Start with LED on

Loop:
if MinutesChanged then
MinutesChanged = 0
if Minutes = 1 then LOW LED ; Turn off LED
endif
Goto Loop[/HTML]

Code:

---

CLEAR
LED        VAR GPIO.0
Delay      VAR WORD

CMCON = 7
ANSEL = 0

Include "Elapsed.bas"
Gosub ResetTime                ' Reset Time to  0d-00:00:00.00
Gosub StartTimer              ' Start the Elapsed Timer

HIGH LED                          ; Start with LED on
SecondsChanged = 0
Delay = 90

Loop:
  if Delay > 0 then
    if SecondsChanged then 
      SecondsChanged = 0
      Delay = Delay - 1
      if Delay = 0 then LOW LED  ; Turn off LED
    endif
  endif
Goto Loop

---

Quote:

---

Originally Posted by Darrel Taylor

Code:

---

CLEAR
LED        VAR GPIO.0
Delay      VAR WORD

CMCON = 7
ANSEL = 0

Include "Elapsed.bas"
Gosub ResetTime                ' Reset Time to  0d-00:00:00.00
Gosub StartTimer              ' Start the Elapsed Timer

HIGH LED                          ; Start with LED on
SecondsChanged = 0
Delay = 90

Loop:
  if Delay > 0 then
    if SecondsChanged then 
      SecondsChanged = 0
      Delay = Delay - 1
      if Delay = 0 then LOW LED  ; Turn off LED
    endif
  endif
Goto Loop

---

---

Hey Darrel,

The code can also be used for hours and days?.

Thanks

Using HoursChanged or DaysChanged, sure can.
<br>

Quote:

---

Originally Posted by Darrel Taylor

Using HoursChanged or DaysChanged, sure can.
<br>

---

Darrel,

Thanks for your answer, I have further questions, I would like for example using three buttons change the hours, minutes and seconds for the LED turns off once the time. With this code can I do?.

Thanks again

Can you do it? Yes.

Can you do it with that code? NO.
<br>

Quote:

---

Originally Posted by Darrel Taylor

Can you do it? Yes.

Can you do it with that code? NO.
<br>

---

Ok Darrel.