DT interrupts - High to Low

the code works, but _B0 is started then PORTB.2 Low to High,
i need High to Low


i tryed
DEFINE LVDINT = PORTB.2
and
DEFINE HLVDINT = PORTB.2

but not work

Code:

---

Button var PORTB.2

ASM
INT_LIST  macro  ;IntSource,  Label,        Type, ResetFlag?
  INT_Handler    INT2_INT,    _B2,    Asm,  Yes 
  INT_Handler    RX_INT,      _Rx,    Asm,  Yes
  Endm

  INT_CREATE
  INT_ENABLE INT2_INT
  INT_ENABLE RX_INT
ENDASM

.....

B2:
  IF Button    = 0 then
      hserout["0"]
  else
      hserout["1"]
  endif
Fim: 
@ INT_RETURN


Rx:
  hserout["Rx"]
Fim: 
@ INT_RETURN

---

Hi,
I'm not sure I understand what you mean, you mean you want the INT2 interrupt to trig on the falling edge of PortB.2?

Anyway, one problem might be that you declare the ISRs as ASM but then you write them in BASIC. It will also be easier for people to help you if you tell us which PIC you're using.

/Henrik.

many thanks.....


i used
INTCON2.4 = 0 ' PORTB.2 - Lo to Hi
and works 100%