Help setting up MPASM with MicroCode studio

I decided to start playing with the interrupts and came across Darrel Taylor "Instant interrupts" includes and wanted to try them. However they call for MPASM and I've never used it before (all I ever use is MicroCode studio + PM).

1. Can someone help me setup and use MPASM with the Microcode studio please?
2. Apart from DT interrupts, is there any advantage of using MPASM vs PM in everyday pic projects?

Thanks,
Tom

With the 18Fs you need MPASM.

Install MPLAB, MPASM is included.
In MCS, under View - Compile and Program Options - Click the Assembler tab.
There is a check box there -- Use MPASM ---
Click find Automatically.
Should find it if MPLAB is installed in the normal place.

Thanks, I'm using 16F628A but I think I still have to use MPASM for Darryl's instant interrupts. Is that correct?

Yep, MPASM is required for DT's interrupts.

1. Installed MPLAB 8.1
2. In MCS, under View - Compile and Program Options - Click the Assembler tab.
3. There is a check box there -- Use MPASM ---
4. Click find Automatically. FOUND.

Is that it, how do I use it?

Quote:

---

Originally Posted by Tomexx

1. Installed MPLAB 8.1
2. In MCS, under View - Compile and Program Options - Click the Assembler tab.
3. There is a check box there -- Use MPASM ---
4. Click find Automatically. FOUND.

Is that it, how do I use it?

---

As long as the box is checked to use MPASM, when you compile a program ( F9 on the key board), MCS will use MPASAM to assemble the code, you do not have to do anything else.

IT is, that's it then.
So PBP is the compiler and MPASM the assembler right? Not sure what is the difference. I thought the compiler translated source into .hex file. What does the assembler do then?

PIC Basic compiles the code into assembly language. The assembler generates the hex.

Refer to the PBP manual section 8, for more info.

Yeah, just read section 8,
Thanks mackrackit