Hello Unregistered ,
Hello. I really do not know in which part of forum to ask, so move this topic according to your decision. I have the following issue. I have PCB designed for 16F1947 chip, in 64 pin package....
I played with the MCP25625 (CAN controler and driver) using the SPI peripheral on the 18F57Q53 a while back (just looked, turns out it's 4 years ago now, bloody hell...). My intention was to make a...
Very useful info that are posted in this thread, but I am afraid that CAN topic is not very popular! Thanks anyway for your kindness to share your experience. Ioannis
Anyone got anything else to add/share please?? I bared my feeble CAN soul, now it's your turn.
Watch out for the slew rate control bit in PICS. It defaults to on in the PIC18F26K80! This screwed me for hours as the SPI just kept falling over above 1mhz. Not enough drive power for the...
Earlier CAN MITM prototypes. One using 16F1825 at 32mhz and one using 18F26K80 at 64mhz. It was possible to drive one of those serial data to RCA video gadgets as well. This made a nice...
Interface board with SPI controlled MCP 2515 and line driver to use with non CAN enabled PIC's https://www.aliexpress.com/item/1005006850683509.html Line driver to use with CAN enabled PIC's....
Menu
64 pin 18F series MCU, which operates from 5V and has same pinout as 16F series?
Hello.
CuriousOne Today, 05:25I really do not know in which part of forum to ask, so move this topic according to your decision.
I have the following issue. I have PCB designed for 16F1947 chip, in 64 pin package....