Yep, I figured it probably have something to do with that.
Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
tumbleweed - 21st May 2024, 14:05Well, I did knew that but something in my mind was telling me not to use it...
I also am using TeraTerm and from time to time Br@y Terminal that has some nice automations.
Ioannis
Well, why not select from Mouser or Digikey?
Ioannis
By the way, why don't you use the USART and Hserin/Hserout commands?
Ioannis
No mistake, it works, sorry (you can delete the post eventually)
Marcick - 20th May 2024, 14:10Hi all,
I'm running a PIC18F67K22 at 4MHz (define OSC 4) and using this command to read serial data at 9600bps
Serin2 Gps_tx, T9600,4000,cnerr,[.........
no problems at all, but in some...
Re: hserout issues on the 18F26K83
Only a tiny bit is enough to do that!
Ioannis Yesterday, 17:29Ioannis