Well, I did knew that but something in my mind was telling me not to use it...
I also am using TeraTerm and from time to time Br@y Terminal that has some nice automations.
Ioannis
Well, why not select from Mouser or Digikey?
Ioannis
By the way, why don't you use the USART and Hserin/Hserout commands?
Ioannis
No mistake, it works, sorry (you can delete the post eventually)
Marcick Yesterday, 14:10Hi all,
I'm running a PIC18F67K22 at 4MHz (define OSC 4) and using this command to read serial data at 9600bps
Serin2 Gps_tx, T9600,4000,cnerr,[.........
no problems at all, but in some...
The controllers will look something like this:
https://i.imgur.com/5crO271.png
https://i.imgur.com/2YRXTYG.png
I've never used MSSP. At least now I know where I stand using the command.
I am polling a controller for Flight Sim. I have multiple encoders on the circuit, but I do not expect more than...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
to read...
I was hoping:
- it would allow me to use the MCP23017 at 400MHz,
- it would be enough to read rotary encoders with an MCP23017,
- it would work using I2CREAD command.
But that's too many IFs....
Re: hserout issues on the 18F26K83
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
tumbleweed Today, 14:05