Hello Unregistered ,
Hello, thank you for visiting the picbasic users forum. Just a little note to remind you that, if your have registeted for a user account and you have not logged in and posted a message, unused accounts are deleted from time to time.
We track user account usage. As part of our general maintenaince and to meet the GDPR requirments, we have elected to delete user accounts that are unused.
We define unused as:
NOT haveing ever posted a message on the forum
AND
NOT having logged in for more than 360 days.
If you find that your account is deleted, because of inactivity, you will need to contact the forum administrator to have the account re-instated. email: [email protected]
Well, you got a giant TO-263 at 15 inches! :) Ioannnis
I had copied over a TO-263 footprint from the public library in Kicad, then checked up in the datasheet from JLCPCB cause I thought the IC was unusually large. It turns out the size of the TQFP-64...
Once I realised it was the issue, went looking and found exactly that. Thanks.
I'm heading to the islands. Maybe another time! Completely removed mpab x and no probs to compile. Rob.
Save on setup fees. Select Basic Parts whenever possible. It's cheaper than using Extended Parts. 9689
Thanks, but don't fool yourself. I post this for me when I forget in 2 days and come back here and Search. :D
I have to say you have done amazing progress on many different tasks, dealing with this project, giving tips for all! Ioannis
Got a lots of tracks? Consider the over/under ™ technique: 9688 :D
Tip: When you think you're doing something wrong and spend countless hours trying to generate a 3D model on JLCPCB: 9685 Stop tearing out your hair, browse the part and check the 3D model in...
The programming spec document for the 12F508 states that the min VDD for programming and bulk erase is 4.5V, so I'd increase that just to be safe....
Re: JLCPCB ordering tip
Well, you got a giant TO-263 at 15 inches! :)
Ioannis - 22nd June 2024, 11:27Ioannnis