Hello Unregistered ,
Hello, thank you for visiting the picbasic users forum. Just a little note to remind you that, if your have registeted for a user account and you have not logged in and posted a message, unused accounts are deleted from time to time.
We track user account usage. As part of our general maintenaince and to meet the GDPR requirments, we have elected to delete user accounts that are unused.
We define unused as:
NOT haveing ever posted a message on the forum
AND
NOT having logged in for more than 360 days.
If you find that your account is deleted, because of inactivity, you will need to contact the forum administrator to have the account re-instated. email: [email protected]
Hi All, I'm finishing a wall clock using SW2812B NeoPixels strings. The digits are 15cm high and it works fine. But I'm looking for something I could display on much bigger (isn't bigger always...
all bit definitions are in the mpasmx folder *.inc files. the datasheet refers to any timer1 type timer for that chip, ie tmr1 tmr3 tmr5 eg 9788
I have a feeling I'll be waiting a while for that to happen. :D I've brought that down to Ticks > 1. I've started again with the original includes, and: - added 32MHz - changed PIE1 to PIE4 -...
how big would Ticks have to be to make this true ? IF Ticks > 100 THEN
I only wanted 1 interval, so I'd know the mods were working with the 16F18877.
I'm already using Timer1, hence why I hoped to use Timer3. I'll swap what I'm doing, so I can use DT's routine without changing Timer1. (At the restaurant, so can't post elaborate reply)
there are more problems here than i can count 1, timer3 has no clock source 2, how can ticks ever get beyond 100 main: LatB.1 = 1 ' Pulse heartbeat IF Ticks > 100 THEN ...
I would start off with interrupt and in routine just add to a counter then in Basic do the math to get seconds, minutes etc. Otherwise that is a lot of code to fumble through. :eek::cool:
16F18877 I start the timer, but I don't get a pulse on Logic Probe after 100 Ticks. Code: #CONFIG __config _CONFIG1, _FEXTOSC_OFF & _RSTOSC_HFINT32 & _CLKOUTEN_OFF & _CSWEN_OFF &...
I don't see a difference between FSR0 and FSR1. I assume I can use either one? 9786 EDIT: Wooops, highlighted the wrong one, but you get the idea. FSR1 is right there as well, and it points...
HDMI wall projector "interface"
Hi All,
flotulopex Today, 09:55I'm finishing a wall clock using SW2812B NeoPixels strings. The digits are 15cm high and it works fine.
But I'm looking for something I could display on much bigger (isn't bigger always...