I "like" the 16F1937, but I have no allegiance towards it (I only have 15 on hand, I'll keep them for "something else"). :D I'm starting the slow/annoying process of choosing another PIC, with...
Since the output on that specific chip will remain as driven output, and if you insist on using this, a crapy solution maybe to add a diode at the output before the pin is connected to the bus.
...
I asked to make corrections and he(or it?) created new code, this time with SWORD type variables
when I asked what kind is SWORD variables is, it answered that these are variables not supported by...
you have now declared the thread solved when it is not!
the problem is only temporally masked and will rear its ugly head when you enable another transmitter
Published on - 27th May 2010 02:01
Number of Views: 9759
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Re: PIC seems to RESET unless I add a PAUSE in Mainloop
Yeah, had Port instead of Lat.
Demon Yesterday, 22:51https://www.picbasic.co.uk/forum/showthread.php/26614-Leaves-the-mainloop
I switched this to WDTE=OFF and it no longer resets.
(have some reading to do on...