Exactly what is writen in manual :D
I2C Slave send 1 bit response after each byte received. If that bit is missing, then command will jump to label. If label is not present, it will just ignore it,...
Published on - 27th May 2010 02:01
Number of Views: 9754
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Re: IOC flag triggered when PIC is unplugged...?
I'm certain it has something to do with voltage levels as the PIC loses power.
Demon Today, 18:54IOC flags are randomly triggered when VDD is cut with a switch, but not on MCLR.
Values are READ from DATA at PIC...