Got it working, stupid datasheet....
Address is $88, not $44, as in datasheet.
Found that using
https://www.picbasic.co.uk/forum/showthread.php/20185-I2C-Ping-program
Then is straight forward...
what have you tried ?
i fumbled around a bit with a scd41 which has a similar modus operandi and managed to get it to work with i2cread/write commands eventually , trick was to send a dummy 0 write...
Does anyone have SHT40 example code?
I'm trying for 2 days, and no progress. Is it posible with i2cwrite, i2cread command?
Trying to do conversion and read data, all 0's. Trying to read serial no,...
Published on - 27th May 2010 02:01
Number of Views: 8745
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Scanning encoder debounce on new scope
I am scanning an EC11 rotary encoder wired according to Bourns debounce design using a Owon SDS1104 scope:
Demon Yesterday, 21:45R1 = 10K
R2 = 10K
C = 0.1uF (Bourns uses 0.01uF)
...