could do.........
1)
'
restarting:
pause 1000 ............... wait a second or 2 to reset all
@ RESET
'
or 2)................
if all slaves are on same 5 or 3 volt supply, then use a small...
Published on - 27th May 2010 02:01
Number of Views: 8740
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Re: Multiple PICs on usart network
For those that are curious about 1-wire communication, check out Dallas 1-wire:
Demon Today, 06:05https://ww1.microchip.com/downloads/en/AppNotes/USART-in-One-Wire-Mode_AppNote_DS00002658B.pdf