You should be able to set the pin type in the 16F18877 to either ST or TTL to match the 1937 type if that's what you're after.
I don't think your 'INLVLB = %00000100' statement changed anything for...
It's not a rant if you guys help me. I didn't know that about the IOC flag being set regardless (I've done a lot of reading on Interrupt - remembering what I read is something else entirely).
...
If you look at your code in post #1, the only thing the ISR does is set a flag that's read in your mainline code (NAV2_Swap_ON = 1).
You could drop all the interrupt stuff and...
no,
why would you ever need microsecond responses to a key press ?
how are you determining the key was held for a reasonable time and not just noise ?
how are you determining the key was...
Published on - 27th May 2010 02:01
Number of Views: 9570
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Menu
Re: 4G sms module
Well, I purchased something and waiting for it to arrive. If it works, I promise to post it although I think there could be many options.
rocket_troy Today, 01:47Troy