Hello Unregistered ,
Hello, thank you for visiting the picbasic users forum. Just a little note to remind you that, if your have registeted for a user account and you have not logged in and posted a message, unused accounts are deleted from time to time.
We track user account usage. As part of our general maintenaince and to meet the GDPR requirments, we have elected to delete user accounts that are unused.
We define unused as:
NOT haveing ever posted a message on the forum
AND
NOT having logged in for more than 360 days.
If you find that your account is deleted, because of inactivity, you will need to contact the forum administrator to have the account re-instated. email: [email protected]
hello! Does anyone have a working code for ads1115 (Proton PicBasic)...
Darn tootin' right. It's nice to finally use it as a diagnostic/testing tool. The scope has always been a mystery to me. I've always wanted to use one, but never had any electronics training. ...
What a magic tool Oscilloscope is, right? Ioannis
I wanted to see just how sharp a Schmitt trigger could clean up a signal. This is using a MR0102 with rocker actuator, followed by the Bourns RC debounce circuit, and then inverted with a...
This can work just fine: 1. Set up a timer interrupt at 10ms. Or even at 1ms and after ten int's do step 2. 2. Every interrupt read the buttons into the arrays. You can use a low priority...
I also found the MAX6818 debouncer, but it's $4.37 for 8-bit at JLCPCB. More like master of none. :wink:
Nice chip! I did not knew that one although I am of the CMOS era! Anyway, since you master the art of software, I think is waste of money to add hardware when you can debounce in software. ...
Yes, the Config block generated errors. Solved by writing : ASM __config _CONFIG1, _FOSC_INTOSC & _WDTE_OFF & _PWRTE_ON & _MCLRE_OFF & _CP_ON & _CPD_ON & _BOREN_OFF & _CLKOUTEN_OFF & _IESO_ON...
Those errors comes from using the wrong syntax for the CONFIG block. The example Ioannis posted compiles just fine.
Wow, I designed those into counting circuits about 45 years ago.....
loop:
Ads1115
hello!
DymDym Today, 14:09Does anyone have a working code for ads1115
(Proton PicBasic)...