Nope, not yet.
I spent a few minutes last night trying to get SPICE working in KiCad and ended up on google. It turns out they have some generic devices, but you're meant to download the SPICE...
Have you tried LTspice? It is totally free and great support either on YouTube or from forums around.
I admit, it is a bit strange if the component is not in the lib and you have somehow to add...
This website sells some electronic components, you can take a look.https://www.pneda.com/
jack199 Today, 09:08I just discovered this online tool.
https://www.circuitlab.com/
I just completed the first lesson as I was watching the video and I'm really impressed. So far it seems to be free.
...
So far it hasn't fail yet with a 9600 baud rate, but I can live with a very low failure rate.
rsocor01 Yesterday, 20:31This is great but why cannot you do it? I think it is cheaper, no mechanics (that can fail), easier to build and only you have to disable it by software. Even if user pushes the button, nothing will...
Ioannis - 1st May 2024, 19:32You mean decreasing ovbiously. But problem is not solved and at random time it is possible that will happen again. Maybe more seldom but it will.
Ioannis
Yes, that explains everything. Unfortunately, I can't use the HSERIN/HSEROUT ports available in the 18F4550 because they are already taken doing the hardware communication. Increasing the baud rate...
rsocor01 - 1st May 2024, 12:32
Re: CircuitLab simulation
Have not tried the KiCAD yet (as well) but LTSpice, despite its primitive environment, it is easy use, at least for the basics.
Ioannis Today, 20:00Worth to give it a try.
Ioannis