Yep, I figured it probably have something to do with that.
Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
Published on - 5th December 2010 16:58
Number of Views: 8034
Hi,
Here's a short list of Frequently Asked Questions that should be of interest for most beginners. Don't hesitate to read them... they're not going to bite you
...
Re: hserout issues on the 18F26K83
Only a tiny bit is enough to do that!
Ioannis Yesterday, 17:29Ioannis