Yup, confirmed. I removed headers from BOM and CPL and those 2 fees went away, as well as an extra $3 or so for cost of headers about $13 + tax reduction).
Yup, first thing I do is match all components on JLC's inventory for a given footprint and input price, JLC part # and Manufacturer part # in my symbol editor (Kicad), as well as if it's a Basic part...
From my experience, the chips that were in stock by JLC were double or triple the price from Mouser. The others that were not in stock were cheaper...!
Published on - 23rd April 2010 19:39
Number of Views: 6304
1. How can I reference a BIT in a BYTE?
2. How can I reference a BIT in a WORD?
3. How can I reference a BIT in a BYTE ARRAY?
4. How can I reference a BIT in a WORD ARRAY?
5. How can I reference a BYTE in a WORD ARRAY?
...
Re: Reusing PGC & PGD pins
Yes you can reuse them but you need to be careful as to what circuitry you hang off the pins.
tumbleweed Today, 13:29Most ICSP programmers have 4.7K pull-down resistors on the PGC/PGD pins and assume the pins will idle...