This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
- it would allow me to use the MCP23017 at 400MHz,
- it would be enough to read rotary encoders with an MCP23017,
- it would work using I2CREAD command.
Published on - 23rd April 2010 19:39
Number of Views: 6212
1. How can I reference a BIT in a BYTE?
2. How can I reference a BIT in a WORD?
3. How can I reference a BIT in a BYTE ARRAY?
4. How can I reference a BIT in a WORD ARRAY?
5. How can I reference a BYTE in a WORD ARRAY?
...
Re: hserout issues on the 18F26K83
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
tumbleweed Today, 14:05