I had 2 options originally:
- stay under 500mA and use USB power
- use a wall adapter and add a voltage regulator component.
USB power is no longer an option with the 4 LCDs. I don't have...
Well, the SMPS you used are crap and although they say it is a LM25xx in fact they are just bad copies. Also the caps and inductors are crap too.
I would design my own SMPS and make sure to follow...
Just be aware that if you're starting with 12V VIN then the regulator is going to dissipate roughly 5W with 700mA out (from your other thread).
Pd = (12V-5V) x 0.7 = 4.9W
That's going to get...
Thanks for your reply.
of course i solved it in other way.
the purpose was to make it easier :-).
attached the code i made, it working perfect.
9808
Figures that I would hit a roadblock after wiring an ammeter to be able to see current and voltage in real-time. That DC-DC converter under the meters has too much noise on VDD and VSS for stable...
Demon Yesterday, 03:57The correct syntax of the STR in the command is STR I2C\count.
So what you are trying to do, send after specific point, 32 bytes of data, will not work.
Use a temp array to transfer the data...
Drift is tottaly different than jumping numbers...
When you said drift I assumed that you started with say 512 as a 50% of FSD and then it went up or down after some time, like 511, 510, 509 etc....
I did an extra test to confirm it wasn't another component on my main test board that was "messing up" the power.
I powered my isolated PIC with that DC-DC converter and sure enough ADC was...
CONFIRMED: Noisy power definitely messes up everything when the PIC tries to compare the "wiper" reading with VDD/VSS, even using two 1K resistors to simulate 50% pot.
I switched to a 7805 supply...
Re: New project - MSFS C++ USB interface
I bought a bunch of these a while back; aluminium heatsink with double-sided tape.
Demon Yesterday, 23:55It fits just right on the back of a IRFZ44N (TO-220). I don't seem to have to bother with a screw/nut (unless...