That is true. People are getting old, things too!
Melabs will not develop PBP anymore and the latest version of PBP needs MPLABX assembler to work. Please DO NOT download the latest MPLABX. Only...
If you have a local service for assembling the pcb's I think cost for the semiconductors will be significantly lower.
Will not hurt asking.
Ioannis
Thanks and appreciated.
It's a 10year old thread...hope it's still relevant.
What's happeend to picbasic? Besides the shopping aspect of the web site is still working all else has seemed to have...
I was curious to see how compact I could design a circuit to debounce switches, as well as see how much it costs at JLCPCB.
- total of 47 input lines,
- debounced using Bourns technique (10K /...
This should point you to right direction
https://www.picbasic.co.uk/forum/showthread.php/12108-Pickit3-from-Microcode-Studio
Hi,
Been many years since I've used PBP but back into it
Just upgraded from my 2011!!! PBP gold to the pro. and dusted off my pickit3
Downloaded PBP and installed fine.
But seems like not much...
It seems to work fine with the serout2 software, but there's something off with hserout. It could be due to a difference in how numerical data is handled by these two types of software.
Best regands...
Thank you Demon
Valuable data
Appreciate.
OK, if you just want to see squiggly lines on the screen :-)
But you're not going to mess it up. It's part of verifying that it actually works as it should.
Compensating the probe, or at least...
Re: JLCPCB ordering tip
The prices for ICs and labour are much higher here in Canada:
Demon Today, 22:4616F1946 TQFP-64 in CAD funds
JLCPCB $2.90
Digikey $4.85-5.31
Mouser $4.45-4.68
Newark $4.54