Need to know the time - accurately for your next project?
The code below allows your PIC to log into a network timeserver and it (eventually) writes the time to a Dallas RTC (code not supplied).
The PIC checks the NET TIME every power-up and thereafter every 4 hours. If it doesn't make connection, it tries an alternate time server. If THAT doesn't work (after retries) it gives up and tries again 4 hours later. A Lantronix XPort handles the connection to the net.
...
Re: Scanning encoder debounce on new scope
This can work just fine:
Ioannis Today, 06:571. Set up a timer interrupt at 10ms. Or even at 1ms and after ten int's do step 2.
2. Every interrupt read the buttons into the arrays. You can use a low priority...