Companion Sheild
The entry level shield is labelled The Companion Shield. This is a PCB laid out in the pattern of a solderless breadboard. The holes are single sided, which means that components can easily be removed using solder mop braid, or a solder vacuum tool, if a mistake is made, or components need to be re-used.
The (PBP3) Companion Shield Manual iCan be downloaded from here
See the Companion Shield in our on-line shop
Re: Replacing 16F628A with 16F1827 - need help, please !
Yes, the Config block generated errors.
fratello Today, 18:56Solved by writing :
ASM
__config _CONFIG1, _FOSC_INTOSC & _WDTE_OFF & _PWRTE_ON & _MCLRE_OFF & _CP_ON & _CPD_ON & _BOREN_OFF & _CLKOUTEN_OFF & _IESO_ON...