Well, why not select from Mouser or Digikey?
Ioannis
By the way, why don't you use the USART and Hserin/Hserout commands?
Ioannis
No mistake, it works, sorry (you can delete the post eventually)
Marcick Yesterday, 14:10Hi all,
I'm running a PIC18F67K22 at 4MHz (define OSC 4) and using this command to read serial data at 9600bps
Serin2 Gps_tx, T9600,4000,cnerr,[.........
no problems at all, but in some...
The controllers will look something like this:
https://i.imgur.com/5crO271.png
https://i.imgur.com/2YRXTYG.png
I've never used MSSP. At least now I know where I stand using the command.
I am polling a controller for Flight Sim. I have multiple encoders on the circuit, but I do not expect more than...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
to read...
I was hoping:
- it would allow me to use the MCP23017 at 400MHz,
- it would be enough to read rotary encoders with an MCP23017,
- it would work using I2CREAD command.
But that's too many IFs....
I didn't even realize that MCS & MCSX had a Serial Communicator [blush]. Been using them for... dunno... 20+ years and never noticed. The only defence I have is I'm only an occasional user/coder.
...
Re: hserout issues on the 18F26K83
Well, I did knew that but something in my mind was telling me not to use it...
Ioannis Yesterday, 20:37I also am using TeraTerm and from time to time Br@y Terminal that has some nice automations.
Ioannis