A number of interrupts for the K80 are different than what's in dt_ints-18.bas, so while it might compile it won't work properly without some adjustments.
i have a suspicion about what the problem is but I'm not willing to waste time testing random
hypotheticals just for the chance to learn later that that's not actually your problem.
why don't...
Only that it is extremely difficult to guess what you might have wrong. Posting the listing and the in some cases the wiring to your PIC, power supply etc greatly helps nailing...
Hello Ioannis,
I have worked with Henrik in the past and he has been most helpful. I'll look again at what he has suggested. If I find the solution, I'll post an answer. If not, well I'll have to...
Something is wrong here... It sounds like you're trying to compile the DT-Ints file by itself, is that the case? If so, just stop doing that. They're not meant to compile by themself, they must be...
I tried to compile the original DT Interrupt file linked from the DT Interrupts tab above. It generated the same error as I listed in my first post. It says that the "INTHAND" was...
Hello,
This "DT_INTS-18-k80.bas" and the matching re-enter file, did you download them from somewhere or are you trying to customize the default ones yourself?
Here is an example of a neat little solar panel tracker that I built for a NiMh battery charger. I decided to build it for a variety of reasons - - -
...
Re: assembly error on DT interrupts
A number of interrupts for the K80 are different than what's in dt_ints-18.bas, so while it might compile it won't work properly without some adjustments.
tumbleweed Today, 15:12As others have said, without seeing the...