Hi,
Kudos for actually reading the datasheet!
Your CONFIG looks allright for selecting the internal oscillator.
[quote]
However, for the osccon and osctune I have the following doubts…
...
Hi guys,
I’m trying to setup the internal oscillator for a 18F2580 mcu at 32Mhz using PLL but I have a few basic questions and just wanted to make sure I get it right…
As I can read from the...
Thanks Richard. I had to park the project since Friday but I've just reopened it and I can see my mistake: as you said, the RE bit was the killer in my character mode command. Seems to be clearing...
rocket_troy - 14th October 2024, 06:18There is probablu RX interupt when connected, and it is not handled correctly for what ever reason.
pedja089 - 12th October 2024, 20:13None that I know of. I'm using the Serial Communicator from MCSP+ 5.0.0.5. on the PC side.
The adapter has RX/TX labels. I connected them in relation to the PC - not the PIC.
I...
I keep this comment in my code that uses encoders:
' Wiper Chart:
' ============
' A B
' --- ---
' 0 0
' 1 0 /\ CCW
' 1 1
Hi, I tried finding a simple compact piece of code for a up/down counter working with the quadrature optical rotary encoder (HES-36-2MD).
The chip I use is a PIC18F2455. Connections are made...
What steps did you take to make the output of the adapter open collector so that it won't clash with the pics outputs on your bus.?
Are you sure it's correctly connected, arduino things are often...
I bought one of these boards on amazon to help with debugging:
9799
https://www.amazon.ca/gp/product/B075N82CDL/
The PIC hangs after the first timer interrupt is triggered. The FT232 is...
Re: Oscillator setup
This can be confusing the way they word this.
tumbleweed Today, 00:09The 'primary oscillator' is the one selected by the 'config' setting.