one thing i cannot master is taking a video of led displays that shows the true colours especially if the display is multiplexed
there is no error the camera does lie
In order to get 1MHz operation you'll likely have to reduce the SDA/SCL pullups to a lower value than you're typically used to.
The rise time of the open-drain signals will need to be faster than...
Hey Richard, just out of curiosity, is this written in PIC Basic? I’m guessing probably not. Either way, good job!
In the meantime, I’ve switched from Basic to C and to the RISC-V architecture. ...
Menu
Re: Low frequency Hardware PWM
I will not stick to specific PIC.
Ioannis Today, 14:10Any one that can do it is OK with me. K42 is most likely the one.
Thanks Richard,
Ioannis