Measuring Tilt using a Three Axis Solution
In order to define the angles of the accelerometer in three dimensions the pitch, roll and theta are sensed using all three outputs of the accelerometer. Pitch (ρ) is defined as the angle of the X-axis relative to ground. Roll (ϕ) is defined as the angle of the Y-axis relative to the ground. Theta (θ) is the angle of the Z axis relative to gravity.
http://www.freescale.com/files/senso...ote/AN3461.pdf
Here is the meat of the code:
solveangle: '**********Solve for x angle ******************************************** if xresult < yresult + zresult then dummy = 5000 'when x is smaller the following equation works best xlong = (dummy * xresult) /(sqr((yresult*yresult) + (zresult*zresult))) else 'keeps results accurate at near 0 and near 90 degree values dummy =30 'when x is larger the following equation works best xlong = (dummy * xresult*xresult) / ((yresult*yresult)+(zresult*zresult)) endif y = xlong x = dummy 'Assign x and y values for atan2 function call atan2 xangle = 9000 - y if yresult < xresult + zresult then dummy = 5000 'when y is smaller the following eqauation works best ylong = (dummy * yresult) / (sqr((xresult*xresult) + (zresult*zresult))) else dummy =30 'when y is larger the following equation works best ylong = (dummy * yresult*yresult) / ((xresult*xresult)+(zresult*zresult)) endif y = ylong x = dummy ' call atan2 yangle = 9000 - y
Re: New project - MSFS C++ USB interface
One of the suppliers that had quoted me for that switch with the red shaft has a model with 100gf to operate. The model I am testing now uses 330gf.
Demon Today, 03:51It would be easier to use that switch cause I...