Problems quickly arise when you want to test using parts off amazon or aliexpress. They rarely have manufacturer names, so getting matching spice models is a...
I spent a few minutes last night trying to get SPICE working in KiCad and ended up on google. It turns out they have some generic devices, but you're meant to download the SPICE...
Published on - 31st May 2010 17:24
Number of Views: 6080
Since this question has come up again, I thought I'd throw this module out to the masses. It is something I worked on a while back, with DT's help. Amid life's other priorities, it got put on the shelf to collect dust.
The basic idea is that by adding the module as an INCLUDE and inserting a couple of commands inside your code, you can have the PIC send timing data to your PC via the hardware serial port. It's made for 18F PICs (although some 16Fs may work too). You also need a timer that is not being used for anything else.
1) Instructions are included, as well as a small example.
2) It worked well for me, and as I recall, DT in testing.
3) Use it however you want.
4) I won't be able to offer much support, but figure there are enough knowledgeable folks around here that can help those who need it.
Re: CircuitLab simulation
Yeah ... too good to be true. :(
Demon - 5th May 2024, 21:57Problems quickly arise when you want to test using parts off amazon or aliexpress. They rarely have manufacturer names, so getting matching spice models is a...