I guess then, the sending device is interrupted by the USB routines while sending and as a consequence the transmission of RS-232 at that time is corrupted.
So I have a need to override a pushbutton (from ON to OFF) and came up with this concept; a solenoid piggyback on a pushbutton switch with a 3D printed cap held by a strand of wire.
...
By lowering the baud rate you're now allowing device B (and SERIN2) twice the time to receive the bits and assemble the byte.
That's probably what's helping a lot more than any line noise issue.
...
Published on - 21st May 2010 14:37
Number of Views: 7453
Hi all,
Few times ago i did this little utility to help in Timer, Usart, Eusart and PWM calc. It have been tested by some user here and there. Thanks to them
'till now, it's seems to be bug free. It assume a minimum of knowledge on your side so far.
I plan to do another version wich will be more complete. It will include more code generation tool. It's still a work in progress but once i'm fixed on the whole idea, i'll post a Trial version.
It will create code for PBP, Swordfish and probably some other compiler.
You have to know it's a tedious job to read all datasheet and be sure everything is correct. For this reason, there's no release date.
Re: SERIN2 Receiving Wrong Data
I guess then, the sending device is interrupted by the USB routines while sending and as a consequence the transmission of RS-232 at that time is corrupted.
Ioannis Today, 11:35Ioannis