This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
- it would allow me to use the MCP23017 at 400MHz,
- it would be enough to read rotary encoders with an MCP23017,
- it would work using I2CREAD command.
Published on - 21st May 2010 14:37
Number of Views: 7516
Hi all,
Few times ago i did this little utility to help in Timer, Usart, Eusart and PWM calc. It have been tested by some user here and there. Thanks to them
'till now, it's seems to be bug free. It assume a minimum of knowledge on your side so far.
I plan to do another version wich will be more complete. It will include more code generation tool. It's still a work in progress but once i'm fixed on the whole idea, i'll post a Trial version.
It will create code for PBP, Swordfish and probably some other compiler.
You have to know it's a tedious job to read all datasheet and be sure everything is correct. For this reason, there's no release date.
Re: hserout issues on the 18F26K83
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
tumbleweed Today, 14:05