all bit definitions are in the mpasmx folder *.inc files. the datasheet refers to any timer1 type timer for that chip, ie tmr1 tmr3 tmr5
eg
9788
I have a feeling I'll be waiting a while for that to happen. :D I've brought that down to Ticks > 1.
I've started again with the original includes, and:
- added 32MHz
- changed PIE1 to PIE4
-...
how big would Ticks have to be to make this true ?
IF Ticks > 100 THEN
I only wanted 1 interval, so I'd know the mods were working with the 16F18877.
Demon Today, 02:38I'm already using Timer1, hence why I hoped to use Timer3.
I'll swap what I'm doing, so I can use DT's routine without changing Timer1.
(At the restaurant, so can't post elaborate reply)
there are more problems here than i can count
1, timer3 has no clock source
2, how can ticks ever get beyond 100
main: LatB.1 = 1 ' Pulse heartbeat
IF Ticks > 100 THEN ...
I would start off with interrupt and in routine just add to a counter then in Basic do the math to get seconds, minutes etc. Otherwise that is a lot of code to fumble through. :eek::cool:
amgen Today, 00:3016F18877
I start the timer, but I don't get a pulse on Logic Probe after 100 Ticks.
Code:
#CONFIG
__config _CONFIG1, _FEXTOSC_OFF & _RSTOSC_HFINT32 & _CLKOUTEN_OFF & _CSWEN_OFF &...
I don't see a difference between FSR0 and FSR1. I assume I can use either one?
9786
EDIT: Wooops, highlighted the wrong one, but you get the idea. FSR1 is right there as well, and it points...
Qualifying Compiler |
Upgrade Description | |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | ||
|
||
|
||
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
HDMI wall projector "interface"
Hi All,
flotulopex Today, 09:55I'm finishing a wall clock using SW2812B NeoPixels strings. The digits are 15cm high and it works fine.
But I'm looking for something I could display on much bigger (isn't bigger always...