I was curious to see how compact I could design a circuit to debounce switches, as well as see how much it costs at JLCPCB.
- total of 47 input lines,
- debounced using Bourns technique (10K /...
This should point you to right direction
https://www.picbasic.co.uk/forum/showthread.php/12108-Pickit3-from-Microcode-Studio
Hi,
Been many years since I've used PBP but back into it
Just upgraded from my 2011!!! PBP gold to the pro. and dusted off my pickit3
Downloaded PBP and installed fine.
But seems like not much...
It seems to work fine with the serout2 software, but there's something off with hserout. It could be due to a difference in how numerical data is handled by these two types of software.
Best regands...
Thank you Demon
Valuable data
Appreciate.
OK, if you just want to see squiggly lines on the screen :-)
But you're not going to mess it up. It's part of verifying that it actually works as it should.
Compensating the probe, or at least...
I noticed that "rhythmic pulse" too. I figured it might be the breadboard.
I wanted to enjoy my scope for a few days before tweaking it and messing it up.
😄
Your waveforms seem to indicate that you might benefit from adjusting the trimmer capacitor on your probe(s).
HenrikOlsson - 11th June 2024, 17:21Darn tootin' right.
It's nice to finally use it as a diagnostic/testing tool. The scope has always been a mystery to me. I've always wanted to use one, but never had any electronics training. ...
Qualifying Compiler |
Upgrade Description | |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | ||
|
||
|
||
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
Re: PBP and IDE/programmer
Thanks and appreciated.
robertg Today, 03:52It's a 10year old thread...hope it's still relevant.
What's happeend to picbasic? Besides the shopping aspect of the web site is still working all else has seemed to have...