I know that now.
The 74HC14 with Bourns' debounce was doing very well. I'm rewiring that back in now to redo testing.
That is a false assumption, all the IOC flag says is that a edge was detected, you need way more info to determine if it was a valid key press, at a minimum you need to know if its still "active"...
richard Today, 03:41I have 0.1uF on VDD/VSS pins, 0.1uF on the switch input pins and 0.01uF on the encoder input pins; all ceramic caps.
That's what the IOC flag was used for; to check if a button was...
Ceramic bypass/decoupling capacitors are often better .
a particularly bad practice, you should always check that it was an actual keypress [ in that was held for a definitive time] before...
I'm certain it has something to do with voltage levels as the PIC loses power.
IOC flags are randomly triggered when VDD is cut with a switch, but not on MCLR.
Values are READ from DATA at PIC...
These are pushbuttons, not rotary encoders with wonky shafts that can jitter whenever the cat farts.
Demon Yesterday, 16:22IOC_COM1_Swap_flag var IOCAF.4
IOC_COM2_Swap_flag var IOCCF.1
IOC_NAV1_Swap_flag var IOCBF.5
IOC_NAV2_Swap_flag var IOCBF.2
These, at random.
Only IOC was...
i guess it begs the questions
what ioc flags were triggered ?
what pins had any ioc functions active?
16F18877
Any idea why it would do that?
The PIC is running normally, and then the IOC flags get set when I pull the USB cable on the MeLabs programmer (or unplug the header).
I know my...
Qualifying Compiler |
Upgrade Description | |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | ||
|
||
|
||
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
Re: IOC flag triggered when PIC is unplugged...?
to get away from all the needless 7416 chips plus the flexibility of pps as a bonus https://www.picbasic.co.uk/forum/images/icons/icon7.png
richard Today, 06:03