loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Re: SERIN2 Receiving Wrong Data
If you're using interrupts on either end then you shouldn't use SEROUT/SERIN as interrupts will upset the timing.
tumbleweed Today, 13:12You should use the hardware HSEROUT/HSERIN routines, but then you will have to use...