This Zip Archive contains files created in CadSofts Eagle (Schematic & Printed Circuit
Board Layout program) Version 4.11r2 Lite. The files are intended for the building of the
El Cheapo (Microchip) PIC Programmer from Myke Predko. The Programmer is 
documented at http://www.myke.com/elcheapo.htm as well as in two books by Myke Predko,
Programming Robot Controllers and
PROGRAMMING AND CUSTOMIZING PICmicro MICROCONTROLLERS 

File		   Size 	Time Stamp		Contents

EL Cheapo.brd	   26,782 	10/18/2005  01:18p   	Eagle Board File
El Cheapo.sch	  215,431 	10/18/2005  01:18p   	Eagle Schematic File 
El Cheapo.pdf	   88,136	10/18/2005  01:12p      Adobe Acrobat PDF file of circuit board        
Placement.GIF	   68,174	10/18/2005  12:56p  	Component Placement Diagram
Contents.txt	    1,518	10/18/2005  02:28p      This File            


NOTES:
If you open the files in eagle you will get a notification about the board and schematic not being 
consistent, due to the fact that I changed some component and net names after the board had been
routed. Ill fix that in a next revision of the board when I find the time, but the connections have NOT
been altered from a time when the board was considered to be consistent.  

The DB25 connector is a WIRED TYPE  i.e. a plug on a cable, I dont think the footprint will 
work on a board mounted connector. 

I have not built this board however I have checked it alongside the original schematic and I believe
Everything is correct. 

ML
