USB connector:
MiniType B Single,Surface Mount
Mill-Max P/N 897-43-005-00-100001
Mouser P/N 575-89743005 

3.3V regulator:
500mA Fixed Output CMOS LDO 3-Pin SOT-223
Microchip P/N TC1262-3.3VDB
Mouser P/N 579-TC1262-3.3VDB
DigiKey P/N TC1262-3.3VDB-ND 


C1, C2, C4, C5, C6:
CAP 0.1uF CERAMIC 0805 SMD (have tons in stock)

C3, C7:
SMD Tantalum CAP 4.7-10uF (have tons in stock)

R3, R4:
330-ohm resistor 0805 SMD (have tons in stock)

R1, R2, R5:
10K-ohm resistor 0805 SMD
Mouser P/N 71-CRCW0805-10K-E3

PWRLED:
LED GREEN S-J TYPE 0805
DigiKey P/N P11500CT-ND (find cheaper alternatives)

Status LED:
Whatever color you guys want in 0805 SMD

X1:
8MHz SMD ceramic resonator AVX Corp P/N PBRC8.00MR50X000
Mouser P/N 581-PBRC8.00MR50X
DigiKey P/N 478-5416-1-ND

D1:
1N4148 SMD SOD123 diode (have tons in stock)

JP5, JP7:
1 x 16 male 0.1" headers (people can get these)

JP10:
1 x 6 0.1" male header (same as above)

JP6:
2 x 8 0.1" female (or male) header. (have tons of 1x8 female on hand)

PIC MCU FLASH 512K 64-TQFP:
PIC32MX440F512H-80I/PT (my 3, + whatever was sent in)

Reset & Program switches:
Any through-hole N.O push button type with 0.2 spacing between pins.
