help converting assembely program

[ahmed_salah]

i have assembely program i want to underestand it to modify some values can any one help me to convert it to picbasic format , attached is the program

[Patrick Pending]

Just a suggestion, but shouldn't you have described its function and what you are hoping to change?

Cheers

[ahmed_salah]

hi,
this program for pic16f84 used to read data stream from GM cars i wanna to chnage some values for ex add sensore remove one and mainly i want to underestand the program first
i will be appriciate if u can really help me to do that

[Patrick Pending]

Hi Ahmed, I see that you have already posted this request on these forums and you are short of volunteers

http://www.picbasic.co.uk/forum/showthread.php?p=60368#post60368

I would love to have the skills to help you, but sadly I don't :(
But on a brighter note, maybe you could help me! - my bathroom needs re-tiling, I want block paving on my drive and I need a complete new kitchen. Can you help me? :)

Thanks in advance

[Archangel]

i have assembely program i want to underestand it to modify some values can any one help me to convert it to picbasic format , attached is the program

You might contact the programs author: http://www.electro-tech-online.com/members/nigel-goodwin.html

[Darrel Taylor]

Nigel Goodwin wrote the Disassembler, that was used to hack somebody else's HEX file or unprotected chip.
The disassembler itself is now part of WINPICPROG also from Nigel.

Who knows who wrote this program, and in what language to begin with.
<br>

[Archangel]

Ahh So, I didn't know that, I saw his name on the ASM file and AHH Sumed . . . My bad. Ya know Darrel, only 2 or 3 people in here, Can help this fellow . . .

[Darrel Taylor]

Ahh So, I didn't know that, I saw his name on the ASM file and AHH Sumed . . . My bad.
I did the exact same thing.
But after searching for WinDis84, it came up with dozens of similar threads on lots of other forums, with everyone asking someone to convert the disassembled code to whatever language that forum was for, or otherwise modify it to their specific needs.


Ya know Darrel, only 2 or 3 people in here, Can help this fellow . . .
And 0 that will. I hope. :eek:
<br>

[malc-c]

....used to read data stream from GM cars

Then buy one of the readers off e-bay - be a lot less hassle, and you would not end up offending a lot of people on this board by expecting those with the experience to produce your project for free without you lifting a finger.

[skimask]

Then buy one of the readers off e-bay - be a lot less hassle, and you would not end up offending a lot of people on this board by expecting those with the experience to produce your project for free without you lifting a finger.

Problem is that the bulk of those readers on eBay are for OBD-II (similar to what I've built recently, but mine rocks and those suck :D)
He wants ALDL, which is, for all practical purposes, a GM standard and not a world wide standard. Therefore, the documentation for reading/writing thru the ALDLink is even worse than it is for OBD-II.
You're right though. The old school ALDL readers are out there... A guy just has to read in depth a bit...

[Archangel]

Problem is that the bulk of those readers on eBay are for OBD-II (similar to what I've built recently, but mine rocks and those suck :D)
He wants ALDL, which is, for all practical purposes, a GM standard and not a world wide standard. Therefore, the documentation for reading/writing thru the ALDLink is even worse than it is for OBD-II.
You're right though. The old school ALDL readers are out there... A guy just has to read in depth a bit...
But you see Jer. A Daewoo isn't really worth the effort or the money to fix. My personal recommendation would be a BFH (Big Friendly Hammer). :)

hi,
i am trying to build a scantool using pic16f84 and lcd to read daewoo data stream i think it is 160 baud data , can any one guide me how to start building this project

ASM

[malc-c]

Problem is that the bulk of those readers on eBay are for OBD-II (similar to what I've built recently, but mine rocks and those suck :D)

[tounge in cheek]
.. can you send me all the schematics and pbp code so I can build one of these so I can reset my Volvo AC ECU... better still build one for me for free, airmail it to me and then let me circulate the code for free to all my friends... or anyone that contacts me from my web site when I advertise the fact ... :)
[/tounge in cheek]

Steve - only kidding mate!

[skimask]

[tounge in cheek]
.. can you send me all the schematics and pbp code so I can build one of these so I can reset my Volvo AC ECU... better still build one for me for free, airmail it to me and then let me circulate the code for free to all my friends... or anyone that contacts me from my web site when I advertise the fact ... :)
[/tounge in cheek]
Steve - only kidding mate!
:D
Ok....!!!!
I am ON THE JOB!!!
You must only answer these questions:

Would you like this hand delivered, installed, checked, custom coded to your specifications, and painted to match your dash?
Also, would you like some fries with that?
And your friends?
What is the airspeed velocity of an unladen swallow?
:D
Can your brain repel intelligence of this magnitude?

See the following:
Any resemblance to real persons, living or dead is purely coincidental.
Void where prohibited.
Some assembly required.
Batteries not included.
Contents may settle during shipment.
Use only as directed.
No other warranty expressed or implied.
Do not use while operating a motor vehicle or heavy equipment.
Postage will be paid by addressee.
Subject to CAB approval.
This is not an offer to sell securities.
Apply only to affected area.
May be too intense for some viewers.
Do not stamp.
Use other side for additional listings.
Do not spindle, fold, or otherwise multilate.
For recreational use only.
Do not disturb.
All models over 18 years of age.
If condition persists, consult your physician.
No user-serviceable parts inside.
Freshest if eaten before date on carton.
Subject to change without notice.
Times approximate.
Simulated picture.
No postage necessary if mailed in the United States.
Breaking seal constitutes acceptance of agreement.
For off-road use only.
As seen on TV.
One size fits all.
Many suitcases look alike.
Contains a substantial amount of non-tobacco ingredients.
Colors may, in time, fade.
We have sent the forms which seem to be right for you.
Slippery when wet.
For office use only.
Not affiliated with the American Red Cross.
Drop in any mailbox.
Edited for television.
Keep cool; process promptly.
Post office will not deliver without postage.
List was current at time of printing.
Return to sender, no forwarding order on file, unable to forward.
Not responsible for direct, indirect, incidental or consequential damages resulting from any defect, error or failure to perform.
At participating locations only.
Not the Beatles.
Penalty for private use.
See label for sequence.
Substantial penalty for early withdrawal.
Do not write below this line.
Falling rock.
Lost ticket pays maximum rate.
Your canceled check is your receipt.
No substitutions.
Shoes and shirts required.
Management not responsible for lost articles.
If rash appears discontinue use.
For external use only.
Children under 18 must be accompanied by an adult.
Fasten seatbelt.
Add toner.
Place stamp here.
Avoid contact with skin.
Sanitized for your protection.
Ribbed for your pleasure.
Ribbed for her pleasure.
Be sure each item is properly endorsed.
Sign here without admitting guilt.
Slightly higher west of the Mississippi.
Employees and their families are not eligible.
Void in Alaska and Hawaii.
Beware of dog.
Contestants have been briefed on some questions before the show.
Limited time offer, call now to insure prompt delivery.
You must be present to win.
No passes accepted for this engagement.
No purchase necessary.
Processed at location stamped in code at top of carton.
Shading within a garment may occur.
Use only in well-ventilated area.
Keep away from fire or flame.
Replace with same type.
Approved for veterans.
Booths for two or more.
Check here if tax deductible.
Some equipment shown is optional.
Price does not include taxes.
Price includes taxes.
No Canadian coins.
Not recommended for children.
Prerecorded for this time zone.
Reproduction strictly prohibited.
No solicitors.
No alcohol, dogs, or horses.
No anchovies unless otherwise specified.
Restaurant package, not for resale.
List at least two alternate dates.
First pull up, then pull down.
Call toll free before digging.
Driver does not carry cash.
Some of the trademarks mentioned in this product appear for identification purposes only.
Record additional transactions on back of previous stub.
Do not attempt this at home.
This page intentionally left blank.
Do not remove this tag under penalty of law.
No Tipping Please.
Driver carries $20.00 or Less.
I'll never drink again.
Children please get your parents permission before calling.
May contain unverified food products.
Do not place metal inside oven.
Objects in mirror may be closer than they appear.
Ladies please remove your hats.
This product is meant for educational purposes only.
List each check separately by bank number.
Tail light warrant applies.
This supersedes all previous notices.

[mackrackit]

[tounge in cheek]
.. can you send me all the schematics and pbp code so I can build one of these so I can reset my Volvo AC ECU... better still build one for me for free, airmail it to me and then let me circulate the code for free to all my friends... or anyone that contacts me from my web site when I advertise the fact ... :)
[/tounge in cheek]

Steve - only kidding mate!
How did Steve get involved in this? :)

[malc-c]

:D

Would you like this hand delivered, installed, checked, custom coded to your specifications, and painted to match your dash?

Most certainly... I would expect nothing less !! You wouldn't expect me to RTFM either would you - :) :)

[skimask]

Most certainly... I would expect nothing less !! You wouldn't expect me to RTFM either would you - :) :)

Of course not! Leave the RTFM to me. After all, isn't that what you're paying me for? :D
Look, I should know...It's not that hard.
After all, I used to bullseye womprats in my T-16 back home...
They're not bigger than 2 meters.