Something New

[jcleaver]

First I Would Like To Thank All That Helped Me Thru The Last Problem

Great Help

Quick Question I Hope

Where Do I Find The Proper Adcin Settings

Adcin 7 Set Port A And E Digital
But I Need A To Be Analog Any Help

Thanks

[BobK]

Hi jcleaver,

What PIC are we talking about? To the best of my recollection if you look at the proper datasheet in the Analog section it should show you how to select which pins will be analog and which ones will be digital.

HTH,

BobK

[manwolf]

If in MicroCode studio click help and look at ADCIN. Might even find some useful code there.

[skimask]

Quick Question I Hope
Where Do I Find The Proper Adcin Settings
Adcin 7 Set Port A And E Digital
But I Need A To Be Analog Any Help
Thanks
Everything you want to know is in the applicable datasheet for the PIC you are using where it has always been...
If the particular information you are looking for is not there, it may not exist and/or it may not be possible (i.e. setting certain combinations of analog and/or digital pins)...