View Full Version : HPWM Help
jetpr
- 12th June 2008, 00:51
Who i set my PWM to by exact 980 or close cycles per second
with 4.0Mhz clock.
bcd
- 12th June 2008, 02:08
I assume you want a 50% duty cycle (50% on / 50% off)?
Using Mr E's PicMultiCalc PWM tool (a google search will find it for you) I get the values attached.
Depending on the PIC chosen it may have 8 bit or 10 bit HWPWM.
bill
jetpr
- 12th June 2008, 02:22
Thanks for the Help
peterdeco1
- 12th June 2008, 18:01
I use this simple command for HPWM output on CCP1 on 16F819.
HPwm 1,127,980 'PWM OUTPUT 980hz 50% duty cyle
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.