View Full Version : USB Controlled - 8x8 LED Dot Matrix
mindthomas
- 12th April 2008, 08:49
Please watch my video and give me a comment
http://www.youtube.com/watch?v=t0xx4xdZY3k
Thank You
chuck
- 12th April 2008, 09:41
What did you create your video with ?
Video good but long time I would say nood need to show shceamtic I and may be but some soothing music so we can relax while watching it.
Good project
mister_e
- 12th April 2008, 10:03
Like it... the first song should be the original track from Bronski Beat instead... but ;)
Breadboard layout a bit messy.. but it show something that works.
A bit too long. Half of it would be more than enough.
6/10
DavidK
- 12th April 2008, 18:15
Can not get your website to come up, http://elec.tkjweb.dk
My browser says "The website declined to show this webpage" "most likely requires a log in"
mindthomas
- 13th April 2008, 07:53
Thanks for all of your replies.
As this is my first electronic video, i need to find out how long i should make it.
I used CamStudio to record, and it is free of charge (http://camstudio.org)
Then i edited the video in Vegas 8
The protoboard, do you mean the soldered or the one where the display is placed?
The website should be running in the nearest future :)
Thank You for all of your comments...
mackrackit
- 13th April 2008, 08:36
NICE JOB!
I like the ending :)
mister_e
- 13th April 2008, 09:07
Then i edited the video in Vegas 8
GRRRRRRRRREAT, my favourite for all audio/video mixing. ACID 6 for my own tunes.
christianmoche
- 1st February 2009, 00:31
great job! congratulations.
mindthomas
- 22nd February 2009, 20:08
great job! congratulations.
Thanks.
Also, i've got my electronics blog running - http://elec.tkjweb.dk
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.