View Full Version : Lost your OSCCAL Value ???
Acetronics2
- 26th November 2007, 12:45
Hi,
Thanks to one of our friends from new Zealand ... we can recover the OscTune Value !!!
http://www.rcgroups.com/forums/showatt.php?attachmentid=1588752
This is for 12F675, but can be translated for other ... Flash memory devices ...
Alain
sayzer
- 26th November 2007, 14:06
My programmer already does that.
Acetronics2
- 26th November 2007, 14:51
Hi, Sayzer
Interesting - really !
and Which is your programmer ??? How does it do that ???
Alain
mister_e
- 27th November 2007, 03:54
mmm, interesting link but, sorry Alain, to me wasting my time (based on >50$/Hour) for a <2$ device is a real money waste... even with the recent things that happened...
If you lost your OSC calibration it might mean that you overlooked your PIC programmer options.. or simply it's a freeware. With any of the previous, the first sentence apply. BTW, if you don't need anything timing critical, even with a stupid RC osc, just don't recall it and it will work.
Acetronics2
- 27th November 2007, 08:35
Hi, Steve
Comment vas-tu, maudit Canadien ???
We do not play the same championship ... you pro, me ... only amateur !!!
And ... I never overwrite the cal value ( MPLAB takes care for me ...)
Best regards
Alain
PS: " Un sou c'est un sou ! " ... as we say here !!!
" a penny is a penny ! "
sayzer
- 27th November 2007, 08:39
Lets quote some today.
mmm, interesting link but, sorry Alain, to me wasting my time....
Lets quote some more.
...If you lost your OSC calibration it might mean that you overlooked your PIC programmer options......
Acetronics2
- 27th November 2007, 09:08
[QUOTE=sayzer;46721]Lets quote some today.
Hi, Sayzer
Might I Understand you had a bad night ???
your programmer make and model ??? ... pleaaaaaaaaase.
Alain
Darrel Taylor
- 27th November 2007, 09:11
Ya know ...,
I think the first post was a perfectly valid way of regaining an OSCCAL value if it got overwritten or erased.
What's the Beef? :eek:
<br>
sayzer
- 27th November 2007, 09:51
The one I use is local made.
I don not think you can find it in France, but if you like to import and trade, I can help you out.
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2158&stc=1&d=1196156818">
Acetronics2
- 27th November 2007, 10:33
Hi, Sayzer
If I try to understand Turkish ... I see "read","Ok","cancel" and "help" commands ( think to correct me if I'm wrong ... )
so, With that programmer, seems You could only read or modify the cal value ...
but, if overwritten ( by error ! ) ... you can't recover the initial value.
My Picstart also does read/modify ...
but I don't know any programmer in this small world able to recover a LOST value. ... would yours automatically retrieve that value ???
Alain
PS: By the way ... does " Oku " mean you got it wrong ???
Acetronics2
- 27th November 2007, 18:11
Finally, I got it !!!
no Turkish product at all ... booooo !!!
http://www.kitsrus.com/pdf/k149d_intro.pdf
and the "Microburn" program doesn't show any kind of auto-retrieving for the cal value ...
Program also FREELY available in English ...
Alain
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.