View Full Version : did anyone got J50 to work ?
viewgsm
- 27th September 2007, 07:45
Hi,
Did anybody got the new family J50 to work with pbp2.5 ?
I can't get it to work !
1st I had problem to fix the clock !
I had to set the OSCTUNE.6=1 to enable the PLL ! and get the 48Mhz !
otherwise it works with 4Mhz or something else crazy !
but no usb connection yet !
Thank you
mister_e
- 27th September 2007, 13:35
can you post your whole code(including configuration fuses), schematic and tell which device programmer you're using?
viewgsm
- 27th September 2007, 16:13
PBP INC. file
CONFIG XINST = OFF
CONFIG PLLDIV = 1 ' I tested this value with 4Mhz and PLLDIV 5 with 20Mhz
CONFIG WDTPS = 512
CONFIG CPUDIV = OSC1
CONFIG FOSC = HSPLL
'''''''''''''''
the PICBASIC CODE :
DEFINE OSC 48
OSCTUNE.6=1
UCON.3=1
USBINIT
MAIN:
USBSERVICE
usbin 3,i,x,m2
GOTO MAIN
'''''''''''''''''''''''''''''''''''''''''''
just simple code to test USB , no luck !
I use ICD2 programmer , and I get the PIC to work and blink some LEDs
the main problem is the USB
viewgsm
- 27th September 2007, 16:47
i think I missed to connect VUSB to VDD , so I did , and still no luck !
viewgsm
- 27th September 2007, 18:01
Ok,
Now I know my hardware is OK !
it works with the mouse demo from Microchip !
so whats wrong with PICBASIC ?!
Thank you
mister_e
- 27th September 2007, 23:17
I would suggest you to try and get some inspiration with my USBDemo.
http://www.picbasic.co.uk/forum/showthread.php?t=5418&highlight=usbdemo
viewgsm
- 27th September 2007, 23:52
I called the support today !
Ok,
1st : the clock is not getting set right form the config. inside the INC file !
the PLL is not going on unless you turn it on manualy from your program !
2nd : I don't get USB connection at all !
so I think there is some bug
the support they don't have a board with this family to test and they will try to test it
tmw.
so I think that adding the support of this family to V2.50 , there is a bug in the PORTING !
still didn't find anyone who got it to work !
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.