Driving a stepper motor bipolar

[debutpic]

Hello all

I want using a stepper motor with a full bidge (L298)
I read the datashett and found the example with a L297
now I would like connect this chip to a 16F8XX

Can you help me or do have a links for that


thank'

[skimask]

Hello all
I want using a stepper motor with a full bidge (L298)
I read the datashett and found the example with a L297
now I would like connect this chip to a 16F8XX
Can you help me or do have a links for that
thank'

If you read the datasheet, then you shouldn't have a problem writing some simple code to set some outputs high and low in a sequence to run your stepper motor...
It would be helpful to know which PIC you were really planning on using (PIC16F8xx is REALLY vague)...
And how about a quick schematic?

[Archangel]

Look at these links:
http://www.picbasic.co.uk/forum/showthread.php?t=101
not pic basic but worth a look: http://www.piclist.com/techref/io/stepper/linistep/index.htm

[debutpic]

It would be helpful to know which PIC you were really planning on using (PIC16F8xx is REALLY vague)...
And how about a quick schematic?

Thank's for your reply,it's my design and I use a 16F877

http://img296.imageshack.us/img296/3049/pontenhdj3.jpg (http://imageshack.us)