PDA

View Full Version : Pbppic18.mac



Firegod
- 23rd May 2007, 16:00
I have been using my PBP for a while now and while working with the USB Wizard, my PBPPIC18.MAC file got overwritten and now my non-USB files will not compile without macro errors. I am out of the country and my original CD is at home. Could someone please email me the file so I can continue to check my work?

[email protected]

Darrel Taylor
- 23rd May 2007, 16:16
You'll have to contact melabs to get that file if you need to.

But, you might check the .bas file for the chip you are using. In the PBP folder.

This one is the 18F4550.bas
'************************************************* ***************
'* 18F4550.BAS *
'* *
'* By : Leonard Zerman, Jeff Schmoyer *
'* Notice : Copyright (c) 2004 microEngineering Labs, Inc. *
'* All Rights Reserved *
'* Date : 12/31/04 *
'* Version : 2.46 *
'* Notes : *
'************************************************* ***************

BANKA $0000, $005F
BANK0 $0060, $00FF
BANK1 $0100, $01FF
BANK2 $0200, $02FF
BANK3 $0300, $03FF
BANK4 $0400, $04FF
BANK5 $0500, $05FF
BANK6 $0600, $06FF
BANK7 $0700, $07FF
'EEPROM $F00000, $F000FF
LIBRARY "PBPPIC18"
'LIBRARY "PBPUSB18"

include "PIC18EXT.BAS"

PORTL VAR PORTB
PORTH VAR PORTC
TRISL VAR TRISB
TRISH VAR TRISC

include "PBPPIC18.RAM"

'*-----------------------* EOF 18F4550.BAS *--------------------*

Make sure the PBPUSB18 Library is commented, and PBPPIC18 is uncommented.

Firegod
- 24th May 2007, 05:30
You'll have to contact melabs to get that file if you need to.

I did contact melabs and here is what I got:

-----Original Message-----
From: Beryl Wilson [mailto:[email protected]]
Sent: Wednesday, May 23, 2007 9:19 AM
To: [email protected]
Subject: RE: PBPPIC18.MAC

please post your message to the forum


-----Original Message-----
From: David Caffey [mailto:[email protected]]
Sent: 22 May 2007 10:50
To: [email protected]
Subject: PBPPIC18.MAC


I have been using my PBP for a while now and while working with the USB Wizard, my PBPPIC18.MAC file got overwritten and now my non-USB files will not compile without macro errors. I am out of the country and my original CD is at home. Could you please email me the file so I can continue to check my work?

Proof of my purchase is below.

Thanks,
David Caffey

skimask
- 24th May 2007, 05:49
I did contact melabs and here is what I got:

-----Original Message-----
From: Beryl Wilson [mailto:[email protected]]
Sent: Wednesday, May 23, 2007 9:19 AM
To: [email protected]
Subject: RE: PBPPIC18.MAC



You contacted Crownhill, not MeLabs.
Crownhill is a reseller.

mister_e
- 24th May 2007, 14:52
Ooooh i see they're really kind ;)

try this one [email protected]

Firegod
- 26th May 2007, 06:23
Ooooh i see they're really kind ;)

try this one [email protected]
Thanks e, got the file any everything is back to normble.

mister_e
- 26th May 2007, 19:04
Good :D Enjoy!