PDA

View Full Version : vesrus772


vesrus772
- 18th May 2007, 21:16
Hi,
i bought Microcode studio plus .I use microprocessor 16F87
but on the target processor display appear only 16F628. How can i enter
16F87 that i need
thanks
veselin
skimask
- 18th May 2007, 21:22
Hi,
i bought Microcode studio plus .I use microprocessor 16F87
but on the target processor display appear only 16F628. How can i enter
16F87 that i need
thanks
veselin

How many other processors are listed in your 'target window'?
vesrus772
- 19th May 2007, 00:23
Only 16F628 is listed ...when i click on target processor blue window apper with the same title 16F628...
skimask
- 19th May 2007, 01:20
Only 16F628 is listed ...when i click on target processor blue window apper with the same title 16F628...

Then it sounds to me like you didn't BUY anything, but got the free, standard version.

http://www.rentron.com/PicBasic/MCS_X3.htm
mister_e
- 19th May 2007, 02:01
If it's for the ICD, it's normal. But free MCS version support all Melabs PIC. It just read the PBP folder, then update the list. Make sure you have the right path selected in MCS for PBP.

You could still open the PIC.ini file in MCS folder and see if there's anything missing. IF so, just add it.